Big John's Guitars - Custom Guitar Electronics

Big John's Guitars - Offering quality in Denton,Tx. for over 20 years

Custom Guitar Electronics

Here are some examples of what your guitar or bass could do!

Strat series tone mod$30

SERIES/PARALLEL WIRING

Imagine being able to play your strat stock and when you need it roll the middle tone knob down and play the middle and bridge PUs in series like a higher output humbucker! with no strat hum!

If you want that big jazz sound switch to the neck and roll back the middle tone and you have a series humbucking PU for huge tone! All with stock controls...no new parts!

"You ain't played a strat till Big John puts the MOJO on it!" Wildman

Series tone mod for Gibsons$30-$50 depending on PUs...

Now this is a versatile mod. The top tone knob is used to blend the stock sound with the series sound. Tone all the way up is stock sound. Tone all the way down is all four coils in series for a huge solo sound. In between are some of the coolest sounds a les paul, SG, or 335 ever made. from a tele to an out of phase funk machine! This mod turns a gibson into a do it all wonder guitar. No visible change to the instrument.

"The series wiring you did on my Les Paul is unbelievable. I can get so many sounds and more tone than before. The coolest sound is a blend between series and stock that sounds doubled like two guitars playing. Thanks Big John!" Craig

Tele series mod

$40 This mod uses the stock 3way switch to play both PUs in series in the middle position instead of the weak stock sound. So now, when you step up to solo let them feel it! Same PUs same switch big tone! "Man my tele is kicking butt with the switch rewired. thanks." Dustin

Dual coil tap pan for $30-$50GibsonsThis mod uses one of the tone knobs on a Gibson to pan from humbucker to single coil on both PUs. No new parts.

Now you can get all the twang and sparkle you want from that rock n roll machine.

Series mod for jazz bass$30

This is a must for J basses. No more thin tone. This mod uses one of the volume knobs to pan from stock sound to both PUs in series. Now your J bass will get that big humbucker tone. The blend in between gets the scooped parallel sounds as well.

"Wow the J bass is playing so good now and the series push/pull sounds so rich it's all I play." Jason

This is just the tip of the iceberg.

If you have been searching for tone...

Big John will give it to you.

Just try to get any of this from the other guys.

*push/pull treble/bass $40 includes pot: goes in place of a standard tone control. Pull up for bass cut and push down for tone control. take the mush out of that neck PU

*super switch kill strat $75 includes $20 switch: This uses a 4p 5t super switch. All hum canceling

1 bridge and middle in series fat HB tone

2 bridge and middle in parallel sparkle clean

3 all 3 PUs in series for a huge solo sound

4 neck and middle in parallel fat clean

5 neck and middle in series Neck HB tone

*stratoBlaster rewire stock 5way $40: This uses the stock switch to get some huge tone out of a strat!

1 bridge and middle in series with a tight filter

2 middle single coil... the only one that hums

3 bridge and middle series no filter fat solo and chunk

4 bridge and neck series thru middle PU big scooped tone

5 neck and middle in series fat HB in the neck tone

*4PDT series /parallel $50 includes switch: this works on a 2 humbucker guitar...one small switch for both PUs series is fat HB sounds and parallel for strat sounds no hum.

*push/pull SERIES/STOCK J bass $50 includes pot: No more thin J bass if you want...pull for both PUs in series for a huge tone. push down for stock J bass.

*esquire stock 3way series/parallel/single coil$50:

This requires some sort of tele mini humbucker with 4 con.

1 single coil stock tele tone

2 both coils parallel tele tone no hum

3 both coils in series rock the house!

and the list goes on and on